Projectkart/General / Misc/SENKU: Smart Egg Incubator
    SENKU: Smart Egg Incubator
    General / MiscWiFi & IoT
    Beginner Featured Project

    SENKU: Smart Egg Incubator

    MakerVerse India 4 hrs 4.9 rating 18.4k views

    Overview & Construction Guide

    Smart Egg Incubator to optimize the temperature and humidity using real-time WiFi telemetry to increase the chance of hatching eggs. Includes automatic egg turning mechanism, digital PID heating control, and cloud alerts over Telegram and Blynk.

    Step-by-Step Build Instructions:

    1. 1Build the thermal insulated acrylic chamber with air circulation vents.
    2. 2Mount the DHT22 sensor in the center zone away from direct heater radiation.
    3. 3Connect the NodeMCU to the relay module to trigger the heating coil and egg turning servo.
    4. 4Flash the Arduino C++ firmware with WiFi credentials and Blynk auth token.
    5. 5Calibrate the PID temperature loop to hold 37.5°C ± 0.2°C consistently.

    Technology & Topic Tags

    Makers Hub

    Build This Project

    Add this project to your personal dashboard to track milestones, record sensor data, and submit working models.

    Bill of Materials (7)

    • 1ESP8266 NodeMCU V3 Microcontroller
    • 2DHT22 High-Precision Temperature & Humidity Sensor
    • 312V PTC Ceramic Heating Element with DC Fan
    • 4SG90 Micro Servo Motor for 45° Egg Tray Tilting
    • 55V Dual-Channel Relay Module (Optocoupler Isolated)
    • 60.96 inch I2C OLED Display (128x64)
    • 712V 5A DC Power Supply Adapter

    Project Parameters

    DisciplineGeneral / Misc
    Sub-categoryWiFi & IoT
    Skill LevelBeginner
    Build Time4 hrs