Showing 50 of 954 scientific instruments • CBSE & NCERT Syllabus

Ray Optics and Optical Instruments
High-grade optical glass block. Specifications: Grade – SF6 or Equivalent. Size – 20 x 20 x 20mm.

Ray Optics and Optical Instruments
A glass cuvette is a small tube-like container with straight sides and a square cross-section. It is sealed at one end and open at the other end. Specifications Size – 10 mm X 10 mm X 50 mm.

Units and Measurements
Portable Laser Distance Meter measures any distance from 0.05 to 40 meters, easily, quickly, and with high accuracy. Laser Distance Meter has multi-functions, including a self-calibration function, with an adjustable range of -9 to 9mm, and saves the latest 30 data values. Power is supplied by two AAA batteries (Included). Specifications: Designed for Linear, Area, and Volume Measurement. Range 0.05 to 40m. Tolerance ±2mm. Readability 30 Degrees.

Atoms & Nuclei
Spectrum tubes produce bright, well-defined spectral lines when the gas inside the tube is excited before the spectroscope. The glass body is provided with metal end caps and has capillary along the middle portion to concentrate the discharge glow. For use with spectrum tube power supply (UP040). Specifications: Length 200mm. Capillary Length 45mm. Max. Current 3mA.

Atoms & Nuclei
OBJECTIVES To understand the concept of diffraction of light. To measure and analyze the emission spectral lines of different elements. PRINCIPLE The source of electromagnetic radiation is atoms. When the atoms of an element are in an excited state, they return to a lower energy state by emitting electromagnetic (EM) radiation. The transition of the electrons in the atom from a higher energy level to lower unique energy levels for the occupation of electrons, due to this the EM spectrum emitted is a unique signature of an element or a substance. The study of the characteristics of EM radiation emitted by atoms is called Atomic Emission Spectroscopy. KEY FEATURES Precise Optical Alignment: The optical alignment of the components is attained by the optical bench, the set-up time is faster and experimentation is easy. Rotating table with On-board Telescope: The telescope on the rotating table is mounted with bearings for smooth rotation. The diffraction grating mounted is mounted at the center of the rotating table. The telescope is easy to focus on and operate. The angle of the rotating arm has a least count of 0.1° for accurate measurement of the spectral lines. Power Supply Built in the Discharge Tube Holder: The built-in power supply makes a more compact system with easier changing of the discharge tubes. Easy power connection and no unnecessary wire intrusions WHAT YOU NEED OB1 Optical Bench Set 0.8m 1 HA010 Converging Lens Holder 1 HA012 Adjustable Collimating Slit Holder 1 UP040 Spectrum Tube Power Supply Assembly 1 UP035 Telescope Assembly 1 AC018 Diffraction Grating 1 AC021 Spectrum Tube, Hydrogen 1 AC022 Spectrum Tube, Helium 1 AC023 Spectrum Tube, Mercury 1 AC024 Spectrum Tube, Krypton 1 AC025 Spectrum Tube, Argon 1 Complete Equipment Set with Instruction Manual from catalogue.

Wave Optics
OBJECTIVES Measurement of Brewster’s angle for a given dielectric dispersive medium. PRINCIPLE When un-polarized light is incident on the surface of a dielectric (such as a glass), at a certain angle of incidence the reflected light is completely plane-polarized. This phenomenon was discovered by Sir David Brewster and, thus, the specific angle is called Brewster’s angle or polarization angle. Also, from the experiment, it can be confirmed that the reflected ray and the refracted ray are 90° apart when the incident angle is set at Brewster’s angle. KEY FEATURES Rotating Table: A simple, smooth, and compact rotating table. The rotating table used is extremely smooth to operate. It is a single assembly that holds a glass sample, analyzer, and light sensor, thus minimizing the size of the whole equipment. Smooth rotation makes measurement continuous and accurate. Light Sensor: This enables the measurement of light intensity at various angles of reflection. The meter reads with a precision of 1 lux. The Lux meter helps obtain a continuous smooth curve of angle vs intensity and determines the Brewster angle much more accurately than the manual method. WHAT YOU NEED OB1 Optical Bench Set 0.8m 1 HA001 Light Source Holder 1 HA010 Converging Lense Holder HA012 Adjustable Collimating Slit Holder 1 UP030 Rotating Table Assembly 1 AC002 Analyzer Square 1 HA511 Light Sensor Holder 1 PH61022D/2 Power Supply for Light Source 1 AC004 Glass Block 1 DP1 Data Processor 1 Complete Equipment Set with Instruction Manual from catalogue.

Mechanical Properties of Fluids
Principle: The Bernoulli’s Experiment utilizes a streamlined channel equipped with a pressure sensor strategically has ability to place at various cross-sections of the flowing air. By measuring dynamic and static pressures at these points under controlled flow conditions, the system verifies Bernoulli’s equation. Objective: To experimentally confirm the validity of this equation, which describes the conservation of energy in fluid flow. To measures static and dynamic pressure at different points within a flowing fluid, alongside flow rate and temperature To analyses the relationship by controlling flow rate and monitoring pressure changes, between pressure, velocity, and elevation, as defined by Bernoulli’s equation. Key Features: Streamlined Design and Wireless Technology: The apparatus features a compact and easy-to-use design with strategically placed pressure sensors. Wireless sensors eliminate the need for cumbersome cables, enhancing portability and ease of use. Real-time Data Acquisition and Analysis: Data from the wireless sensors is transmitted directly to a tablet, allowing for convenient graph plotting and real-time analysis of pressure changes. This simplifies data collection and visualization, streamlining the verification process. Cost-Effective and Transparent Design: Compared to alternative systems, the Supertek apparatus offers a more affordable solution for verifying Bernoulli’s principle. Additionally, its transparent acrylic cover allows for clear visualization of the air flow within the channel, enhancing the learning experience.

Magnetism and Matter
Objectives To observe and study the magnetization behaviour of the ferromagnetic magnetic materials provided. Principle The B-H curve is the curve characteristic of the magnetic properties of a material or element or alloy. It tells you how the material responds to an external magnetic field, and is a critical piece of information when designing magnetic circuits. A Ferromagnetic material, retains its magnetization even after the external magnetic field is removed. And the reversal or change in the direction of the applied external magnetic field results in a change in the magnetization of the ferromagnetic material. It is seen that the change in the magnetization lags behind the change in the applied external magnetic field. Thereby, a hysteresis behaviour is exhibited. Key Features Compact Setup – The apparatus design is compact and yet effective to perform the experiments with ease. The simple connections and stand to hold the teslameter probe, makes it easy to handle. Multiple samples included – Multiple ferromagnetic samples are provided to study the BH curves of the different materials. The removable cores make it easy to change between samples. Equipments Needed for the Experiment PH94014 B- H Curve Measuring Apparatus 1 PH64505 Multimeter 1 PH61035D/5 Advanced Power Supply 1 PH93240 Teslameter 1

Wave Optics
Objectives To find the concentration of a liquid using the samples of known concentration using Beer Lambert’s Law. Principle Beer Lambert’s law relates the attenuation of light through a substance and the properties of that substance. Light interacts with matter in the following ways: emission, absorption, transmission, and reflection or scattering. Depending on the physical and chemical properties of the matter under interaction, there can be one or more ways in which light interacts. It is because of these interactions light can be used as a probe to measure the physical and chemical properties of materials. Key Features Precise Optical Alignment: The optical alignment of the components is attained by the optical bench, the setting up time is faster and experimentation is easy. Digital Lux Meter: This enables the measurement of light intensity at various angles of reflection. The meter reads with a precision of 1 lux. What You Need OB1 Optical Bench Set 0.8m 1 UP001 Upright 2 HA001 Light Source Holder 1 HA004 Polarizer Holder 1 HA006 Analyzer Holder 1 HA012 Adjustable Collimating Slit Holder 1 HA025 Cuvette Holder 1 HA510 Light Sensor Holder 1 DP1 Data Processor 1 PH61022D/2 Power Supply for Light Source 1 AC006 Glass Cuvette 1 Complete Equipment Set with Instruction Manual from catalogue.

Magnetism and Matter
OBJECTIVES Measuring the magnetic field of a straight conductor and of circular conductor loops as a function of the current. Measuring the magnetic field of a straight conductor as a function of the distance from the axis of the conductor. Measuring the magnetic field of circular conductor loops as a function of the loop radius and the distance from the loop. PRINCIPLE Electric currents generate magnetic fields. Biot–Savart law is an equation describing the magnetic field generated by a constant electric current. It relates the magnetic field to the magnitude, direction, length, and proximity of the electric current. In this experiment, we study the magnetic field characteristics in the straight conductors and different types of circular coils. KEY FEATURES Multiple coil variants: The equipment comprises a variety of coils to carry out experiments. One can study Biot Savant law for a straight conductor, coils of variable length, density, and a number of turns. All coils are mounted on a common horizontal bench and upright system. 2-axis Teslameter: The equipment is provided with a teslameter with probes to measure both axial and tangential directions. A square shaft mount is provided for the accurate mounting of the probes. WHAT YOU NEED OB2 Optical Bench Set 0.4m 1 HA015 Solenoid with Variable Turns 1 HA016 Solenoid with Variable Lengths 1 HA017 Solenoid with Different Winding Density (Set) 1 HA018 Straight Conductor Holder 1 PH93240 Teslameter, With Axial and Tangential Hall Probe 1 PH61035D/5 Power Supply 1 Complete Equipment Set with Instruction Manual from catalogue.

Laboratory Hardware & Measurement Essentials
DC REGULATED POWER SUPPLY (SMPS) provides stable and adjustable DC output for laboratory, industrial, and educational applications. Designed with advanced switch-mode technology, it offers high efficiency, compact construction, and automatic overload protection for reliable performance under all operating conditions. FEATURES Compact, lightweight, high efficiency and minimal heat generation Continuously variable output from 1.0 – 15 V DC Digital voltage display for accurate readings Overload & short-circuit protection with auto-reset function Stable and ripple-free DC output under varying load Single rotary knob for smooth voltage adjustment TECHNICAL SPECIFICATIONS Input Voltage: 90 – 270 V AC, 50/60 Hz Output Voltage Range: 1.0 – 15 V DC Regulation Type: Switch Mode Power Supply (SMPS) Display: 3-digit LED digital voltmeter Protection: Overload & short-circuit with auto-reset Output Terminals: 4 mm safety banana sockets Suggested Leads (not included): PH90051/3 , PH90051/4

Laboratory Hardware & Measurement Essentials
A compact data display system with the ability to capture, process and display multiple sensor data. SPECIFICATIONS: 3.5” Touch display interface to be able to select which sensor data to be displayed. 3 sensor data can be interfaced at a given point. The Compact Size of 175mm x 100mm x 40mm makes it handy to use. Powered by a Micro USB connector makes it is more versatile.

Semiconductor Electronics
OBJECTIVES To find the energy band gaps for different semiconductor diodes and LEDs PRINCIPLE At an absolute zero-degree temperature, semiconductors are pure insulators. As the temperature is increased thermal energy creates vibrations in the crystal lattice and a few electrons, which acquire sufficient vibrational energy break their covalent bond, become free, and move to the conduction band. The energy required to rapture the covalent bond is designated as energy gap EG and termed as energy gap or band gap energy. KEY FEATURES Built-In Heater: The heating element is built into the system and is powered by 12V input. The efficient heating mechanism heats the system to the required temperature in a few minutes with a minimum power requirement of 40W. Modular Design: The modular design of the setup allows the testing of multiple diodes as well as different LEDs. Built-In Voltage and Temperature Probe: All the necessary parameters to be measured are available directly on the setup itself. WHAT YOU NEED PH94002 Energy Band Gap Apparatus 1 PH61035D/5 Power Supply 1 PH64505 Multimeter 1 AC026 Syringe, 20ml 1 AC028 Silicone Oil, 50ml 1 Complete Equipment Set with Instruction Manual from catalogue.

Wave Optics
OBJECTIVES Observe the effect of a magnetic field on the plane of polarization of polarized light as it passes through a dispersive medium. Measure the Verdet’s constant of a given dispersive material. PRINCIPLE When linearly polarized light passes through an optical medium in a region of the strong magnetic field, the plane of polarization of linearly polarized light rotates by an angle. The angle of rotation of plane-polarized light is proportional to the length of the optical medium and component of the magnetic field in the direction of light. The factor of proportionality is medium-specific and is called Verdet’s constant and this effect is known as the Faraday Rotation or Faraday Effect. Discovered by Michael Faraday in 1845, the Faraday effect was the first experimental evidence that light and electromagnetism are related. In the experimental setup, the optical medium is an SF6 glass cube. KEY FEATURES Modular U- Core design with precise optical alignment – U-Core along with pole pieces are designed with the Poka-Yoke principle so that the optical alignment is undisturbed when the pole pieces are moved to accommodate samples of different dimensions. Light Sensor- This enables measurement of light intensity which in turn helps in measuring the amount of rotation of plane polarization. The meter reads with a precision of 1 lux. Sensor-based measurements eliminate the errors in values due to simple eyesight measurement. Moreover, it provides the freedom to conduct the experiment at any setting of polarizer-analyzer angles. WHAT YOU NEED OB1 Optical Bench Set 0.8m 1 HA001 Light Source Holder 1 HA004 Polarizer Holder 1 HA006 Analyzer Holder 1 UP025 Electromagnet Set Assembly 1 AC004 Glass Block 1 HA510 Light Sensor Holder 1 PH93225G Gauss Meter 1 PH61035D/7 Power Supply for Electromagnet 1 PH61022D/2 Power Supply for Light Source 1 DP1 Data Processor 1 DPS01 DP Switch 1 Complete Equipment Set with Instruction Manual from catalogue.

Ray Optics and Optical Instruments
The light source holder consists of 15W projector light mounted on the square rod. The light source with an optical glass lens creates a bright and sharp spot of light. Specifications White Color Light Beam. Power 15W.

Ray Optics and Optical Instruments
An adjustable laser source is mounted on a square rod. The laser source has a ball-bearing mount. This enables the user to minutely adjust the direction of the laser source, during experimentation, to get proper optical alignment. Specifications Red Laser

Wave Optics
The polarizer linearly polarizes the light from the light source. The analyzer records the angle of polarization of light after it passes through a medium. When used together, one can find the total angle of rotation in light.

Wave Optics
Diffraction grating mounted on a square rod. Specification: Diffraction Grating – 500 Lines / Inch.

Ray Optics and Optical Instruments
Our lens holder can hold 50mm diameter lenses and mirrors for optical bench experiments.

Ray Optics and Optical Instruments
Precision, the spring-loaded adjustable slit is mounted on a square rod. Specifications: Slit Opening: 4mm (Max.).

Moving Charges and Magnetism
Solenoid with variable turns is mounted on the square rod. Output terminals are provided at 100, 200, 400, and 600 turns.

Moving Charges and Magnetism
Solenoid with variable lengths is mounted on the square rod. Output terminals are provided at 30, 60, and 90mm lengths.

Moving Charges and Magnetism
Set of 5 solenoids, each with different turn density (number of turns per unit length). Solenoids are mounted on the square rods. spacing between two consecutive turns in the solenoid varies from 0.7 to 4mm.

Moving Charges and Magnetism
The straight conductor is mounted on the square rod. Solenoid with multiple turns acts as a straight conductor along the one open edge of the solenoid. Specifications Wire gauge 21SWG. No. of turns 35.

Dual Nature of Radiation and Matter
The LDR module is mounted on the square rod. The LDR module is provided with terminals for easy connections.

Semiconductor Electronics
The Photodiode module is mounted on the square rod. The Photodiode module is provided with terminals for easy connections.

Ray Optics and Optical Instruments
Black screen mounted on a square rod. Size 110 x 100mm.

Ray Optics and Optical Instruments
The Cuvette holder is designed to be used with an optical bench assembly, for holding the glass cuvette of the cross-section of 10mm x 10mm.

Wave Optics
The holder is designed to hold a 22mm quarter-wave plate. A waveplate is an optical device that alters the polarization state of a light wave traveling through it. The quarter-wave changes the phase difference between the two components of polarized light traversing it by one-fourth cycle.

Wave Optics
The holder is designed to hold a 22mm half-wave plate. A waveplate is an optical device that alters the polarization state of a light wave traveling through it. Half-wave plate, reduces by ¹/₂ cycle, the phase difference between the two components of polarized light traversing it.

Laboratory Hardware & Measurement Essentials
The light sensor module, mounted on a square rod, when used with the Data Processor gives a precise measurement of light intensity. The least count of 1 Lux provides accurate readings.

Ray Optics and Optical Instruments
Light sensor module for use with rotating table assembly (UP030). The light sensor when used with Data Processor measures light intensity at various angles of reflection and gives a continuous smooth curve of angle vs light intensity. The meter reads with a precision of 1 lux.

Ray Optics and Optical Instruments
Travelling Light Sensor Holder, mounted on the square rod, can be held upright on the optical bench. When used with Data Processor (DP1), this holder measures the light intensity of various orders (like 1st, 2nd, and so on) of the interference patterns formed by diffusing light by any obstacle or opening. Specifications Least count – 1 Lux

Wave Optics
Objectives To produce and observe the interference pattern. To measure the wavelength of laser source using the interferometer. Principle Phenomena of interference can be explained by the principle of superposition. Consider two E.M waves simultaneously propagating through the same region of space. The resultant electric field at any point in that region of space is the vector sum of the electric field of each wave. Depending on the strength of the resulting electric field at a point in space where the two waves superpose, we observe dark and bright regions in the interference pattern. Key Features Easy to Setup – The apparatus is built on a sturdy and portable platform. The legs are height adjustable to aid leveling of the platform & precise optical alignment of the laser beam. All this reduces the time taken for setup and aids the ease of measurements. High quality beam splitter and reflective mirrors – The setup comes with 40 x 40 x 40mm beam splitter cube and 40 x 40mm (98% highly reflective) mirrors for clear fringe pattern. 1 micron step movement – The complex double lever mechanism enables a least count of 1 micron in movement of the fixed mirror. Measurement error is less than 5% in wavelength measurement.

Laboratory Hardware & Measurement Essentials
OBJECTIVES To experimentally verify malus’s law. PRINCIPLE Light, when modeled as a wave phenomenon, can be classified as a transverse electromagnetic wave consisting of oscillating electric and magnetic fields that are oriented perpendicular to each other. Depending on the orientation of the plane of polarization of the electric field with respect to the direction of propagation of the wave, the wave can be classified as polarized or un-polarized. To measure the variation of transmission of an EM wave through two polarizers as a function of the angle of orientation between them and prove Malus’s Law. KEY FEATURES Precise Optical Alignment: The optical alignment of the components is attained by the optical bench, the set-up time is faster and experimentation is easy. Easy Analyzer Movement: The design of the analyzer helps for easier rotation without disturbing the optical alignment. The least count of 1° aid for more accurate readings. Digital Lux Meter: A digital lux meter enables the measurement of light intensity for each rotation of the analyzer. The least count of 1 Lux provides accurate readings. WHAT YOU NEED OB2 Optical Bench Set 0.4m 1 HA001 Light Source Holder 1 HA004 Polarizer Holder 1 HA006 Analyzer Holder 1 HA510 Light Sensor Holder 1 PH61022D/2 Power Supply for Light Source 1 DP1 Data Processor 1 Complete Equipment Set with Instruction Manual from catalogue.

Current Electricity
Supertek’s Millikan Oil Drop Apparatus is a contemporary version of the classic design which allows the students to observe the velocity of an oil drop rising and falling in an electric filed. The apparatus is equipped with camera which allows the user to connect it with the computer screen for an easy viewing of the droplets. It permits the calculation of the force acting on the charge carried by the oil drop. What’s Included 1x Millikan Oil Drop Apparatus 1x Non-Volatile Oil 1x Multimeter 1x Stopwatch Experiments To determine the charge of an electron by Millikan’s Oil Drop Method

Ray Optics and Optical Instruments
A versatile and modular system that can be utilized across many experiments. The optical bench has three core parts: Rail, Mounts, and Uprights. All the core parts have been designed in such a way that they are suitable for multiple types of experiments. KEY FEATURES Excellent stability and easy set-up of the optical bench – Mounts can be fixed to the rail by just aligning and sliding two screws into the rail and fastened. The uprights can be placed and fastened at any desired position with ease Height adjustable mounts – The optical bench is designed with three-point mounts, with two of their height adjustable and lockable with a range of 20 mm. The height adjustment gives precision in maintaining the horizontal axis of the bench. The mount bases are rubber padded to avoid sliding the optical bench on the lab benches. Anti-rotation square holders on the uprights (Patent Pending) – The optical bench uprights are designed with square holders and square shafts for holding accessories. One of the major needs in optical experiments is to maintain the alignment of accessories. More often, the accessory holder is susceptible to rotation. Square shafts ensure the anti-rotation of the accessories and make experimenting hassle-free. It also avoids any kind of lateral bend or movement of the accessories. All parts are scratch-resistant and the movement of uprights on the rail is seamless.

Laboratory Hardware & Measurement Essentials
Objectives To study the photoconductivity of CdS Photoresistor, in the following conditions: Applied voltage vs photocurrent (IPH) at constant irradiance (Φ). Photocurrent (IPH) vs irradiance (Φ) at a constant applied voltage (V). Principle The phenomenon of photoconductivity occurs when an incident light shown upon a semiconductor causes an increase in its electrical conductivity. This is because of the excitation of electrons across the energy gap into the conduction band, which leads to an increase in the number of free carriers in the conduction band, hence, an increase in the conductivity of the semiconductor. Here, we can study the characteristics of the CdS photoresistor under different conditions of light intensity and applied voltage. KEY FEATURES Precise Optical Alignment: The optical alignment of the components is attained by the optical bench, the set-up time is faster and experimentation is easy. Fine and Easy Light Intensity Adjustment: Light intensity adjustment is done via the use of two polarizers. This helps in easier and fine light intensity adjustments. Simple and Easy Connections: The color-coded terminals on the various components aid in the ease of connections thus reducing the setup time. WHAT YOU NEED OB2 Optical Bench Set 0.4m 1 HA001 Light Source Holder 1 HA004 Polarizer Holder 1 HA006 Analyzer Holder 1 HA020 LDR Module Holder 1 PH61022D/20 Power Supply, 0-15V, 200mA 1 PH61022D/2 Power Supply for Light Source 1 PCE1-C: Complete Equipment Set With Instruction Manual

Units and Measurements
Set of seven cubes. Comprising of Brass, Copper, Aluminium, Iron, Lead, Zinc, and Tin cubes.

Units and Measurements
Set of four one-inch density cubes containing one each of Nylon, Acrylic, Aluminium, and Pinewood.

Units and Measurements
The four specimens in this set help the students to explain the concept of the mole. The Mole set contains four element specimens: Copper, Iron, Zinc, and Aluminium. Each sample contains one mole, 6.02 X 10 23 atoms of the element.

Units and Measurements
A set of 10, one-inch density cubes in a storage box. Materials included are Acrylic, Aluminium, Brass, Copper, Maple, Nylon, Pine, Poplar, PVC, and Steel.

Units and Measurements
Set of different half-inch diameter specimens of varying lengths, supplied in a wood storage block. The set includes cylinders of Aluminium, Brass, Copper, Glass, Hard Rubber, Delrin, PVC, Acrylic, Teflon, Nylon, Maple, and Pinewood.

Units and Measurements
The set consists of specimens of 15 different types of materials. Students measure the mass, length, and volume to determine the density of each of the materials. The set contains a sturdy storage base with one sample each of Walnut, Pine, Maple, Polypropylene, Polyethylene, Polyamide, Acrylic, Polyurethane, Phenolic, Polyvinylchloride, Delrin, Aluminium, Brass, and Copper. Samples are stamped with a letter code for easy identification. Instructions included.

Units and Measurements
To demonstrate the inverse relationship between density and length. The specimens, Aluminium, Copper, Nylon, Polyvinylchloride, and Polyethylene, are all 12 mm in diameter with 15 gm mass. Length range from 15 to 100 mm. Instructions are included.

Units and Measurements
Four cylinders of Copper, Brass, Steel, and Aluminum, each 13 mm diameter and 50 mm long.

Units and Measurements
Set of half-inch diameter density cylinders consists of 12 specimens of the same material but varying lengths, stored in a wood base. Includes a set each of Aluminium, Brass, PVC, and Polypropylene. Set of 48.

Units and Measurements
Consists of two of each of the seventeen blocks as follows: Blocks, 50 x 40 x 30 mm – Softwood, Hardwood, Paraffin wax, Aluminium, Iron, and Polystyrene. Blocks, 20 x 20 x 100 mm – Perspex, Glass, Slate, Aluminium, Softwood, Marble. Block, 50 x 50 x 20 mm – Lead. Block, 50 x 50 x 80 mm – Aluminium. Block, 50 x 50 x 200 mm – Hardwood. Block, 20 x 20 x 50 mm – Brass. Block, 40 x 40 x 20 mm – Iron.
Showing 50 of 954 materials